Private work · port
RADXA_PICO_CLAW
A port of PicoClaw — the ultra-light Go AI agent — to Radxa single-board computers.
- Upstream PicoClaw (Sipeed), MIT
- Language Go
- Target Radxa SBC · ARM64
- Status not published
What it is
PicoClaw is Sipeed's ultra-light personal AI assistant in Go: under 10 MB of RAM, a boot measured in milliseconds, and one binary for RISC-V, ARM, MIPS and x86. This project ports that agent to the Radxa single-board computers.
What the upstream project publishes
Every figure below is the upstream project's own, taken from its README at the time of writing. None measures this port: the page describes what is being ported, not what has been measured on a Radxa board.
| Property | Published value |
|---|---|
| Memory | Under 10 MB in the original build; 10–20 MB in recent ones, as the project notes. |
| Boot | Under one second on a 0.8 GHz single core, by the project's own table. |
| Architectures | RISC-V, ARM (armv6, armv7, arm64), MIPS and x86, from one Go binary. |
| Hardware | Any Linux board from about $10, per the project. |
| Licence | MIT. |
What this page does not claim. Radxa boards do not appear in PicoClaw's published hardware list, which covers Raspberry Pi, Allwinner, SOPHGO, SpacemiT and Loongson parts among others. That absence is why a port is a piece of work rather than a build flag, and it is also why nothing here says the result boots in under a second: nobody has measured it on a Radxa board in this repository.
Stack
- Go
- Radxa SBC
- ARM64
- Linux
The port's own repository is private.